Adjust the dish inclination and tighten the fixing screws. Item C.

Since there is no standard among the dishes' manufacturers, each has adopted a personal scale which often does not correspond to the real elevation. As a consequence this is the most delicate stage of the mounting procedure. To make the installation of a motorized system increasingly easier, Stab is utilizing the list of the manufacturers, found on "DISHES" item of this web-site, whose dishes carry the scale of real adjustment values. When installing the dishes produced by the manufacturers included in this list, adjust the inclination according to the value obtained by Stab calculation (BLUE value) and tighten the screws definitively. For all others dishes, check the inclination (P value), suggested by the manufacturer or by your retailer, for installation of a fixed dish pointed to the satellite nearest to your SOUTH (if you lie in the Northern hemisphere) or nearest to your NORTH (if you lie in the Southern hemisphere). Please insert this value in the following formula: Elevation of the Dish with Motor Sat HH100/HH120 = P - (60 - |Latitude|) Latitude: Value obtained by Stab calculation (RED value) The result of the above formula represents the approximate value of the dish adjustment which could need a little correction when optimizing reception.